METOLIGHT PIR003 - Motion Switch, 12-24 VDC, 4 A, for LED-Strips
METOLIGHT PIR003 - Motion Switch - Sensor
for installation in wall or ceiling, for automatic switching of LED strips 12/24 VDC - 4A, max. 96 watts
Newly developed PIR sensor for switching LED strips. The integrated PIR motion sensor detects ambient heat differences up to approx. 2 m and switches on the connected LED strips and switches them off again after approx. 40 seconds.
This sensor is simply placed in the wall or ceiling (16 mm cut out) and then simply inserted between the LED power supply - output side 12 VDC or 24 VDC and the LED strip to be switched. The use is only possible in dry indoor areas
Important: The maximum switchable current is 4 A. This means 48 watts for 12 volt LED strips or 96 watts for 24 volt LED strips. If overloaded, the sensor circuit will be irreparably damaged. We recommend a maximum load of 80% of rated power.
Advantages:
- Automatic switching during motion detection
- Infrared motion detection
- Range approx. 2 m
- Compact dimensions 16 mm diameter, 60 mm long
Technical specifications:
- Input voltage 12 VDC - 24 VDC
- For LED strips / LED lamps 12 VDC or 24 VDC
- Maximum switching current: 4A
- Maximum load at 12 VDC: 48 watts
- Maximum load at 24 VDC: 96 watts
- Decay time: 40s
- Detection angle: 150 ° (wall mounting) / 360 ° (ceiling mounting)
- Detection range: 2 m max.
- Mounting height: 3 m max
- Motion detection: 0.5 ~ 3 m / s
- Dimensions: 16 x 60 mm (D x H)
Synonyms:
Bewegungsmelder, Bewegungssensor, Bewegungsschalter, Radar-Sensor, Radar-Schalter, automatischer Lichtschalter, motion sensor, motion detector, motion switch, microwave motion sensor.
