LED-Tube-2120 - 120 cm, 25 Watt, 2 x 120°, both sides lighting, pure white, 3200 lm, matted

METOLIGHT LED tube 2120 - 120 cm, 25 watts 2 x 120 ° on both sides, 5000K, matted

Two-sided light emission 2 x 120 ° - ideal for advertising signs, banners, light boxes and display cases

Retrofit replacement for fluorescent tubes T8 / T10 - 120 cm, 36 watts , Base G13

Double-sided radiating LED tube 120 - 140 ° for one-sided connection to 230 VAC, ideal for installation in advertising signs, light boxes, banners and wherever two opposite sides are to be illuminated with one tube.
High-efficiency SMD LEDs, matte PC shell, 30 mm - T10 diameter, G13 socket, replaces 1 x 120 cm - 36 watt fluorescent tube. Branded SMD LEDs on a special circuit board for best heat dissipation and a particularly long service life.
Stable aluminum cooling profile on the side, extra light, unbreakable construction.
We supply these LED tubes type 2120 with a clear or matt shell and also for special applications for operation at 24 VDC.
High dielectric strength, no flickering due to voltage fluctuations.
It is not necessary to rewire the luminaire or even remove the existing magnetic ballasts (KVG or VVG).
The METOLIGHT LED tube also works directly on 230 volts AC on all conventional ballasts. All you have to do is replace the supplied LED starter (item 101495). However, a connection in tandem must be checked beforehand. Here it may be that the tube does not light up.
Operation on emergency power systems with direct voltage between 180 and 260 V DC is possible.

Areas of application:
The LED tube in light color 4800-5200K - nature white is ideal for use in banners, billboards, light boxes, etc. Do not operate on dimmers or electronic ballasts.

Special features:
Epistar high-efficiency SMD LEDs with 120 lm / W, CRI Ra> 80, 26 mm - T10 diameter, fixed base G13. Special aluminum core circuit board for best heat dissipation and particularly long service life. Double insulated power supply with short-circuit protection, stable aluminum cooling profile, extra light, unbreakable construction, very resistant to interference radiation, no flickering due to voltage fluctuations.

Installation:
switch off the lamp, remove the old fluorescent tube and starter - insert the METOLIGHT LED fuse starter - insert the METOLIGHT LED tube - switch on the lamp - done.
Individual test at Asmetec:
every LED tube is individually tested in the Asmetec light laboratory for function and compliance with the technical data. In addition, every LED tube goes through an insulation resistance test of 1500 volts.
The tests of the photometric data, ISO lines, EMC, switching cycle tests etc. are carried out in batches.
Customers receive the corresponding test reports on request.

Notes: Also available in other light colors: 3000, 4000K and for operation on 24 VDC Guarantee:
We give a 3-year guarantee on this LED tube (see guarantee conditions)